Product transfer
A trolley-mounted pump that can be moved between transfer points in your winery or brewery. The pump and connections are selected for the product and circuit.
TIKO INNOV
Mobile centrifugal pump
For product transfer or CIP return, with an integrated variable-speed drive and local or externally controlled operation.
The right flow. The right pressure.
The pump is selected for the flow rate and pressure required by your installation. The illustrated configuration has a 3 kW motor: this is an example, not a limit for the range.
- Illustrated motor power
- 3 kW
- Mounting
- Mobile trolley
- Integrated variable-speed drive
- Manual speed adjustment by potentiometer / 4–20 mA setpoint or Modbus; other interfaces on request
3 kW example specifications
- Illustrated motor power
- 3 kW
- Assembly power supply
- 400 V three-phase
- Variable-speed drive
- Schneider Electric ATV320U30N4W · 3 kW
- Maximum liquid temperature
- 120 °C · pump with EPDM seals
- Flow at the duty point
- 4.5 m³/h · 4 500 L/h
- Differential pressure at the duty point
- 3.2 bar
- Reference speed
- 2 910 min⁻¹
- Motor frequency
- 50 Hz
- Motor voltage Δ / Y
- 220-240 V Δ / 380-415 V Y
- Metal parts in contact with the product
- 316L (1.4404)
- Impeller diameter
- 165 mm
- Pump connections (inlet / outlet)
- SMS / ISO 2037 · DN/OD 63.5 / 38 mm
- Mechanical seal and elastomers
- C / SiC · EPDM
- Maximum pump inlet pressure
- 4 bar
These values describe the duty point of the 3 kW example, not the limits of the range. Reference curves use water at 5 °C, relative density 1 and viscosity 1 cP.
Ambient temperature: ATV320U30N4W drive: -10 to +40 °C without derating. +40 to +60 °C with derating, subject to installation conditions and Schneider curves. This ambient temperature is separate from the pumped liquid temperature.
CIP return
The pump can also return cleaning solutions to the CIP station. Sizing takes account of the return circuit and the operating conditions of the installation.
Local or external control
The integrated drive allows manual operation using the potentiometer on the pump, or control by the installation. The external control method and connection are defined for your project. 4–20 mA setpoint or Modbus; other interfaces on request.
Equipment photos
Technical documentation
Mobile centrifugal pump · 3 kW · PDF · English
Technical documentation
Drawing dimensions: length 859.62 mm, width 400 mm, indicated height 1,013 mm excluding castors. These dimensions do not represent a guaranteed overall footprint.
Discuss this configuration
To size your pump: required flow and pressure, liquid, temperature, suction conditions and available connections.