Solutions
The Tiko Innov EZC carbonator integrates with your beverage line. The EZC3000 configuration shown is sized for a throughput of 3,000 L/h.
EZC · EZC3000
The Tiko Innov EZC carbonator integrates with your beverage line. The EZC3000 configuration shown is sized for a throughput of 3,000 L/h.
Discuss my EZC project ↗Allow maintenance clearances and connections when planning the EZC3000 installation.
Download the EZC3000 dimensional drawing · PDF ↓CO₂ injection forms part of process control. Product, inlet temperature, available pressure and the required gas content determine the settings and instrumentation. The 3,000 L/h throughput applies to this configuration; it is not a general limit of Tiko Innov’s offering.
Layout, product and CO₂ connections, filler supply conditions and cleaning are defined for your installation. The standalone EZC module is distinct from the EZ_FPC system, which combines thermal treatment, cooling and carbonation.
EZ_FPC ↗In-line measurement and regulation of CO₂ content, sensors and control functions are defined for your product and production targets.
Specify the beverage, its condition at the inlet and the carbonation level required.
Discuss your projectFlow rate, temperature, pressure, utilities and downstream filling conditions are considered when defining the system.
Control requirements, operator use and the integration of cleaning into your production schedule form part of the scope.
Useful questions
Beverage type, flow rate, temperature, pressure and the required carbonation level help define the process. Downstream packaging, utilities and cleaning must also be considered.
The EZ_FPC unit combines flash pasteurisation, heat recovery, cooling and automatic carbonation. Its sizing and process conditions are defined for the beverage and operating requirements.
Explore the range
We use exclusively high-quality Schneider Electric or Siemens industrial PLCs. All our automatic machines are remotely accessible through Ubiquity; this access is enabled as standard on the automatic EZ range. It uses the network connection available at your site.
A single machine has a 17-inch HMI. A combined system, such as EZCIP + EZF, uses a 27-inch HMI for greater comfort. Centralising control of both machines can save up to €15,000 depending on the configuration, compared with two separate control systems. The amount is specified in the quotation.
EZC3000 · English · PDF · 2 pages · Rev. 1.6
Let’s build what comes next
