EZ_FPC range. Your flow rate. Your custom process.
EZ_FPC is a made-to-order range. Flow rate, treatment and equipment are sized for the requirement: EZ_FPC 4000 and EZ_FPC 8000 are examples, not a capacity limit for Tiko Innov.
One range, multiple capacities.
The EZ_FPC 4000 example has a maximum flow of 4,000 L/h. An EZ_FPC 8000 can be designed for an 8,000 L/h requirement; other flow rates are available on request. These figures describe configurations, not the maximum capacity of the range or Tiko Innov. Product, thermal protocol, carbonation, utilities and layout define the solution.
EZ_FPC · Design view
Heat recovery
The documented EZ_FPC 4000 configuration processes up to 4,000 L/h. Its heat-recovery exchanger uses energy from the treated product to preheat the incoming product.
A controlled hot-water loop and a steam-fed exchanger heat the product according to the selected recipe. The holding tube is sized for the flow rate, temperature and required treatment time.
Cooling and carbonation
Final cooling prepares the product for carbonation. Automated CO₂ injection and control support the dosing process, while a buffer tank supports production continuity.
Applications and options
Applications: beer, fruit juices, fermented drinks, flavoured drinks and non-alcoholic beverages. Options include Anton Paar CO₂ measurement and control, a Siemens PLC and application-specific instrumentation.
Documented process equipment
Equipment: pump and heat exchanger, holding tube, automatic cleaning and remote support. The thermal protocol and parameters are defined for the product and actual production conditions.
Configuration shown
Key specifications.
Maximum flow of the EZ_FPC 4000 example
4,000 L/h; other capacities on request
Product outlet temperature
4–6 °C
Heating
Steam through a controlled hot-water loop
Final cooling
Glycol water
Carbonation
Automatic
Buffer tank
250 L stainless steel
Recipe management
Integrated
Operator interface
17-inch HMI for a single machine; 27-inch for a combined configuration
Industrial PLCs
Schneider M241; Exclusively Schneider Electric or Siemens
Sensors
IFM
Remote access
Ubiquity, enabled as standard on the automatic EZ range
The final configuration is defined for your application. Indicative values do not replace the agreed machine specification.
Industrial control, accessible remotely.
We use exclusively high-quality Schneider Electric or Siemens industrial PLCs. All our automatic machines are remotely accessible through Ubiquity; this access is enabled as standard on the automatic EZ range. It uses the network connection available at your site.
Combine machines, centralise control.
A single machine has a 17-inch HMI. A combined system, such as EZCIP + EZF, uses a 27-inch HMI for greater comfort. Centralising control of both machines can save up to €15,000 depending on the configuration, compared with two separate control systems. The amount is specified in the quotation.
Technical documentation
EZ_FPC range: custom pasteurisation and carbonation · English · PDF · 2 pages · Rev. 1.6