EZF
Two alternating lines for production during cleaning, at 8,000 L/h.
EZF_2x8000
Two filtration lines operate alternately: one produces at 8,000 L/h while the other can be cleaned. They do not filter simultaneously. Each line has two stages, with eight 30-inch cartridges per housing. This arrangement allows production to continue during cleaning of the other line.
Cleaning: Separate CIP unit, for example EZCIP250. The CIP unit is not shown in these drawings or 3D views.
Download the dimensioned drawing · PDF ↓Discuss this configuration ↗EZF_2x8000
Before bottling, wine priming introduces wine into the previously cleaned and prepared filters and filler. The wine progressively replaces residual water in the circuit, creating start-up volumes of product and, depending on the stage, a water/wine mixture.
In the configurations shown, a recovery tank collects these volumes from the filters and filler. Recoverable fractions can be retained for gradual reintroduction instead of discarding large volumes of product intended for bottling.
During production, a peristaltic pump doses the recovered volumes back into the line at the percentage selected on the HMI. This recovery helps reduce product losses; the reintroduction setting is adapted to the product and the batch quality requirements.
EZF_2x8000 · PDF · English
Product, media, flow rate, utilities and layout are sized together.
EZF_W ↗We use exclusively high-quality Schneider Electric or Siemens industrial PLCs. All our automatic machines are remotely accessible through Ubiquity; this access is enabled as standard on the automatic EZ range. It uses the network connection available at your site.
A single machine has a 17-inch HMI. A combined system, such as EZCIP + EZF, uses a 27-inch HMI for greater comfort. Centralising control of both machines can save up to €15,000 depending on the configuration, compared with two separate control systems. The amount is specified in the quotation.
EZF
