Tiko Tools

Pipe velocity and volume

Estimate average liquid velocity and volume in a full pipe.

← All tools

Pipe velocity and volume

Estimate average liquid velocity and volume in a full pipe.

Prefilled examples to adapt. Use a decimal point or comma, without thousands separators.

Enable JavaScript to use the calculator. Formulas and assumptions remain available alongside it.

Method and assumptions

A = π(D/1 000)²/4; V = A × L × 1 000; v = Q/(3 600 000 × A)

Full circular pipe, actual internal diameter D in mm, length L in m and flow Q in L/h. DN is not the internal diameter. Excludes bends and fittings; does not calculate pressure losses, pump pressure or cleaning effectiveness.

Pipe velocity guidelines

Transfer of low-viscosity liquids: around 1 to 2 m/s on the discharge side is an initial order of magnitude. Product properties, viscosity, pressure losses, foaming and product sensitivity may require a different velocity.

CIP of full pipework: a range of 1.5 to 3 m/s is commonly considered for low-viscosity cleaning solutions to strengthen mechanical action. This guideline does not directly apply to spray balls, filters or heat exchangers.

Velocity alone guarantees neither turbulence nor cleanliness. Diameter, viscosity, actual circulation in each branch, chemistry, temperature and time must be assessed. Pump flow and pressure are sized for the circuit; the protocol is validated on the installation.

Results are rounded for display; assumptions and input accuracy limit actual precision.

Worked example

For an internal diameter of 50 mm, a length of 20 m and a flow of 10 000 L/h: volume = 39.26991 L and mean velocity = 1.414711 m/s.